StudentShare
Contact Us
Sign In / Sign Up for FREE
Search
Go to advanced search...

Laboratory Report of an Experiment on Optical Fibre Transmission - Coursework Example

Cite this document
Summary
The laboratory findings seeks to find out and elaborate the nature of the waveforms when input frequencies of the oscilloscope are either reduced or increased while keeping the supply of power at a constant voltage level of 5 volts. The report shows the equipment required to…
Download full paper File format: .doc, available for editing
GRAB THE BEST PAPER97.8% of users find it useful
Laboratory Report of an Experiment on Optical Fibre Transmission
Read Text Preview

Extract of sample "Laboratory Report of an Experiment on Optical Fibre Transmission"

Download file to see previous pages

Oscilloscopes are signal analyses that exhibit images of an individual conducting the experiment of signals generally in the form of voltage against time. The users employ pictures removed from the oscilloscope to comprehend the frequency of the graph, the graph amplitude and the entire shape of the graph that will vary basing on what the study intends to find out. Function generators, are also sources of signals whose voltage is set by an individual conducting the study. It runs for a given period.

The outcome signals are in rectangular form of sine waves and are employed to govern the other equipment such as a clock to work as a timing signal. Function generators have features whether digital or analogue the digital type that includes: Choosing the type of the waveform. They are generally the sine, triangular and square waves. A means to select frequency of the waveform. Basic rates range between 0.01Hz to 100MHz. The means to select the amplitude for the waveform identified. A minimum of two outputs.

The primary output is one where the user is conducting the research finds the waveform that one needs. The second output, being employed in the experiment is the Aux (TTL) which gives a square wave that has a standard of 0 to 5 voltage signal levels. It is what we are using to synchronize the oscilloscope to the variable basic output signal. This experiment also included the use of transmitter. SFH750V transmitter produces 650 nm with the ability of outputting 20 UV of light. The device has a width of 35 nm and needs current, basing on the required intensity, of 10 to 45 mA.

The transmitter is a four-pin device and comprises of a LED, glass-bead focusing as well as a threaded chamber into an optical fibre is inserted. The study also needs one to have a receiver. The one that was found useful was a photodiode receiver. It is designed to be

...Download file to see next pages Read More
Tags
Cite this document
  • APA
  • MLA
  • CHICAGO
(“Laboratory Report of an Experiment on Optical Fibre Transmission Coursework - 1”, n.d.)
Laboratory Report of an Experiment on Optical Fibre Transmission Coursework - 1. Retrieved from https://studentshare.org/engineering-and-construction/1669385-laboratory-report-of-an-experiment-on-optical-fibre-transmission
(Laboratory Report of an Experiment on Optical Fibre Transmission Coursework - 1)
Laboratory Report of an Experiment on Optical Fibre Transmission Coursework - 1. https://studentshare.org/engineering-and-construction/1669385-laboratory-report-of-an-experiment-on-optical-fibre-transmission.
“Laboratory Report of an Experiment on Optical Fibre Transmission Coursework - 1”, n.d. https://studentshare.org/engineering-and-construction/1669385-laboratory-report-of-an-experiment-on-optical-fibre-transmission.
  • Cited: 0 times

CHECK THESE SAMPLES OF Laboratory Report of an Experiment on Optical Fibre Transmission

The Gear System

A gear is a standard device that is used in the transmission of power in engineering.... A geared system includes any system that is toothed and designed for transmission or receiving of motion using straight engaged teeth.... It facilitates the rotational speed, transmission of power (torque), and output and input shaft direction.... Questions that are fundamental and the experiment seeks answers to are: what is the gear system?...
5 Pages (1250 words) Report

Guglielmo Marconi: The Development of the Inventions

This meant that the transmission of the wireless messages got across without using any wires.... Other researchers also used the spark-gap transmitters, but they could not get the transmission to cover a long-range, the transmission usually covered a few hundred meters.... The case was no different for Guglielmo; he also got limited transmission when he first attempted the experiment.... The transmission improved drastically and he was able to transmit signals with a range of roughly about 1....
5 Pages (1250 words) Report

Gamma-Ray Spectroscopy

This paper ''Gamma-Ray Spectroscopy'' tells that This experiment was set up to achieve several objectives.... The present experiment sought to investigate the dependency of the photomultiplier tube of the NaI(Tl) detector alongside the high voltage supply that clearly showed a voltage requirement that needs to be stabilized and also demonstrated a strong dependency on the applied voltage.... Using 22Na, 60Co, 137Cs, and 152Eu as radioactive sources, the calculation for three efficiencies was done in this experiment....
8 Pages (2000 words) Report

Optical Fiber Testing

Chromatic dispersion caused by light of varying wavelengths, and polarization mode dispersion, resulting from fibre polarization are important and limit fibre links.... hellip; Standard telecommunication uses a single-mode fibre, but there are, as a matter of fact, two orthogonally polarised modes which are supported using waveguide structure.... The test fibre is excited using a linearly polarised source of light that conventionally has a 1310nm or 1550nm LED as well as a polariser effective over the region of the operating wavelength....
11 Pages (2750 words) Report

Mythbusters in Science

Galileo had also conducted a similar experiment in his home country where he dropped objects from the leaning tower of Pisa.... In the show, the presenters started by visiting the Empire State building and talking to veteran employees at the building; they realized that several other people had tried the experiment with minimal success.... dam Savage and Jamie Hyneman followed a two-step format in testing the myth during this show; first, they replicated the circumstances and then duplicated it by expanding the parameters of the experiment....
5 Pages (1250 words) Report

Design Practice of Cone Calorimeter

( Thomas Roy Crompton,2006) The experiment that has been used will be covering the Sample of mass, Surface Area, Thickness, Heat flux of the experiment, Time of the test, Total heat evolved, Total amount of the oxygen consumed, Smoke released, Mass loss during the experiment, Specific mass loss rate, Average heat release rate, Effective heat of combustion, mass loss rate, Specific extinction area, Carbon monoxide yield, and Carbon dioxide yield....
8 Pages (2000 words) Report

Designing a Model for Controlling Fire and Smoke

This report "Fire Engineering" discusses a two-zone model that is found to provide good smoke control for a warehouse building.... Ventilation in the building on the upper part of a wall is essential as well as the fresh air feed at the lower end of the wall.... hellip; The development of a basic model for FDS was through a mathematical approach which is common in CDF models where the proper emphasis is placed on slowing down the flow of heat transfer that is brought about by fire (Novozhilov, 2001)....
6 Pages (1500 words) Report

Small-Scale Compartment Fire Experiments

hermocouplesA total of thirteen thermocouples are utilized in measuring the temperatures in the course of the experiment.... This report "Small-Scale Compartment Fire Experiments" discusses the general trend of the mass reducing with time but in some incidences, the mass appears to rise before dropping again....
8 Pages (2000 words) Report
sponsored ads
We use cookies to create the best experience for you. Keep on browsing if you are OK with that, or find out how to manage cookies.
Contact Us